Is used with suitable guide bracket to support a sliding or cantilever gate. Available in different sizes.

Used with Single roller guide plate (JRS 30& 40) to support arch shaped sliding gates and inclined cantilever gates. Comes in 3 metres length and 3mm thickness. Is available in two different sizes.

Is used with suitable guide bracket to support a sliding or cantilever gate. Available in different sizes.

Galvanized module 4 steel rack wich can be welded or bolted. Suitable for module 4 pinions found on most sliding gate motors. 1m length. 12mm x 30mm.

Is used with suitable guide bracket to support a sliding or cantilever gate. High quality rubber rings protect the gate from scratchs.

Features:

• Made in Czech Republic
• Easy Assembly

Module 4, 1m toothed drive rack. Nylon and steel core fibre. To be bolted to gate frame. 20mm thickness and 28mm wide.

Features:

• Made in Czech Republic
• Easy Assembly

Sliding gate acessories available as a Kit .Made in Italy .Galvanized .Different wheels sizes available as per the weight of your gate .

360° Rotating wheel & offset gate hinge with bearing .Galvanized material .Suitable for corner sliding gates

Galvanized safety bar of 2m length which can be bolted to top gate frame.

Features:

• 270g/m2 Hot Dipped Galvanized
• Made in Czech Republic
• German Steel
• Easy Assembly

Galvanized safety bar of 2m length which can be welded to top gate frame.

Features:

• 270g/m2 Hot Dipped Galvanized
• Made in Czech Republic
• German Steel
• Easy Assembly

Galvanized module 4 steel rack wich can be welded or bolted. Suitable for module 4 pinions found on most sliding gate motors. 1m length. 12mm x 30mm.

Features:

• 270g/m2 Hot Dipped Galvanized
• Made in Czech Republic
• German Steel
• Easy Assembly

Smoothest way to guide your gate into the post.Can be used for both cantilever and sliding gates.

Features:

• 270g/m2 Hot Dipped Galvanized
• Made in Czech Republic
• German Steel
• Easy Assembly

A secure locking dropbolt which is easy to fit to the gate with our expanding fasteners. Used on double gates, once the dropbolt is in the ground the locking plate is rotated round the edge of the gate, once the second gate is closed the dropbolt cannot be lifted.

Features:

• Robust – Strongly constructed from galvanised steel, also available with a stainless steel bolt.
• Easy to fit – Needs just two 15mm holes in the gate and fixed with the expanding fasteners provided.
• Adaptable – Fits left and right hand gates
• Innovative and secure – Once the dropbolt is lowered and rotated, closing the second gate prevents the dropbolt being unlocked.
• 19mm bolt that has 140mm movement.

Offset hinge suitable for corner sliding gate . 
Material - Chromium Plated Steel .
With bearing .  

Roller end catches are the smoothest way to guide your gate into the post. Install between two hoop posts or using the PARK side bracket.

Features:

• 270g/m2 Hot Dipped Galvanized
• Cantilever System - For Trackless Sliding
• Made in Czech Republic
• German Steel
• Easy Assembly

A secure locking dropbolt which is easy to fit to the gate with our expanding fasteners. Used on double gates, once the dropbolt is in the ground the locking plate is rotated round the edge of the gate, once the second gate is closed the dropbolt cannot be lifted.

Is used with suitable guide bracket to support a sliding or cantilever gate. Available in different sizes.

Features:

• Made in Czech Republic
• Easy Assembly

Features:

• Made in Czech Republic
• Easy Assembly