Galvanized steel track of 3.5mm thickness. Suitable for doors of 6m wide and 1200kg weight. To be used with the roller SPEED C. Available in two different lengths.

Features:

• The tracks are galvanized and structurally sound which gives them flexibility and permits carrying high loads without distortion. 
• You can build the gate right on the track. 
• The track is made from low carbon steel which allows for excellent weldability 
• Size- 73x61mm
• Finish - 270g/m2 Hot Dipped Galvanized
• Make- Made in Czech Republic
• German Steel

* 100 % Aluminium
* Costomized desing , colour and size .
* Specially made heavy aluminium profiles exclusively for gates .
* Powdercoated with exterior quality texture finish .
* Extra reinforcement for Motorization . 
* Premium quality pivot hinge made in SS and Brass .
* Available in both swing and sliding .
* Size limitation - 4.5m clear opening .

Galvanized steel track of 3mm thickness. Suitable for doors of 2m wide and 320kg weight. Can be used with the rollers 2 SAK, 4 SAK

Features:

• Size 57 x 67mm
• Finish - 270g/m2 Hot Dipped Galvanized
• Make- Made in Czech Republic
• German Steel

Strela 57

C Profile Guide Track for Cantilever Gate.Available in different sizes .Suitable for cantilever gates upto 15m opening 1500 Kg capacity .Thickness from 3 -5 mm .Material - Galvanized .

Compared to a traditional sliding gate, the entire gate is cantilevered off the ground without any wheels traveling on the ground. 

This allows for free movement of the gate in uneven ground conditions and reduces the wear and tear on the gate and on any installed gate automation. 

The sealed bearings on the carriage assembly require no maintenance or lubrication. Besides, it gives the gate a nice clean look with minimal visible hardware

Country of origin - Italy

Cantilever hardware kit to make sliding gate with out bottom track .

Available in different sizes for cantilever gates with up to 15 metres clear opening & 1500 kg gate weight.

Features:

• Bearing Wheels
• Hot Dipped Galvanized
• Cantilever System - For Trackless Sliding
• Made in Italy
• Suitable for Inclined Surface also
• Compared to a traditional sliding gate, the entire gate is cantilevered off the ground without any wheels traveling on the ground. 
• This allows for free movement of the gate in uneven ground conditions and reduces the wear and tear on the gate and on any installed gate automation. 
• The sealed bearings on the carriage assembly require no maintenance or lubrication. Besides, it gives the gate a nice clean look with minimal visible hardware 

Carriage for cantilever gates with up to 8 metres clear opening & 700 Kg max gate weight.Speed MEK is more suitable for inclind surface drive ways and also to reduce the distance between pillar and gate compared to Speed ME.Features: Double Bearing Wheels270g/m2 Hot Dipped GalvanizedCantilever System - For Trackless SlidingMade in Czech RepublicSuitable for Inclined Surface alsoCompared to a traditional sliding gate, the entire gate is cantilevered off the ground without any wheels traveling on the ground. This allows for free movement of the gate in uneven ground conditions and reduces the wear and tear on the gate and on any installed gate automation. The sealed bearings on the carriage assembly require no maintenance or lubrication. Besides, it gives the gate a nice clean look with minimal visible hardware

Galvanized steel track of 5mm thickness. Suitable for doors of 6m wide and 1800kg weight. To be used with the roller SPEED CM. Available in two different lengths.

Features:

• Size- 95x86mm
• Thickness - 5mm
• Finish - 270g/m2 Hot Dipped Galvanized
• Make- Made in Czech Republic
• German Steel

Cantilever Sliding Gate Kit for trackless sliding .
Available from 3m upto 15m opening gate .Max weight capacity 2000 Kg .Galvanized .
Made in Italy

Cantilever gate system means ,trackless sliding gate system .
The entire gate doesnt touch on the ground .
Accessories are imported from Itlay .Available for 3m upto 18 m opening gate and 1500 Kg weight .

Bracket for top/bottom end stop which is fixed to the wall or pillar .This is available in two different sizes.

Features:

• 270g/m2 Hot Dipped Galvanized
• Cantilever System - For Trackless Sliding
• Made in Czech Republic
• German Steel
• Easy Assembly

End cap for cantilever track Stage LZ . Is fixed on both sides of C profile guide.


Features:

• 270g/m2 Hot Dipped Galvanized
• Cantilever System - For Trackless Sliding
• Made in Czech Republic
• German Steel
• Easy Assembly

Aluminium Cantilever Gates for trackless sliding . Available upto 15 m opening .Heavy aluminium sections .Powder coated .Italian make accessories .